Our Services

Contact Info

Construction chemicals

Suman Chemical Industries has a well-known name in the field of manufacturing of construction chemicals purely directed towards the building and construction industry. Our construction chemicals are used by the construction and civil repair industry. These chemicals help to enhance concrete strength and quality, provide water-tightness, and protect concrete structures from atmospheric degradation.

Our range of admixtures, sealants, waterproofing solutions, repair mortars and systems, tile fixing adhesives, tile joint fillers, floor hardeners, and cement / epoxy based grouts are used by construction companies, ready-mix concrete manufacturers, civil contractors and repair and waterproofing applicators. These products find applications in infrastructure projects, industrial construction, residential and commercial construction.

The products are sold directly to large customers and through a channel of dealers and distributors across many parts of the country.

PRODUCT NAME DESCRIPTION
Chem-O-Proof IC Chem-O-Proof IC is a specialty additive based liquid integral waterproofing compound.
  • Produces impermeable matrix.
  • Reduces porosity and bleeding.
  • Improves consistency at lower dosage.
Chem-O-Splast HS Chem-O-Splast HS is based on a blend of polymers. It is a brown liquid instantly dispersible in water. It will give flowing concrete or high strength concrete with extended workability.
Chem-O-Splast CF Chem-O-Splast CF is a chloride free, superplasticising admixture based on selected synthetic polymers. It is supplied as a brown solution which is instantly dispersible in water.
Chem-O-Splast SP Chem-O-Splast SP is a chloride free, superplasticising admixture based on selected synthetic polymers. It is supplied as a brown solution which is instantly dispersible in water. It can provide very high level of water reduction and hence major increase in strength can be obtained coupled with good retention of workability to aid placement.
Chem-O-Splast SMF Chem-O-Splast SMF is a sulphonated melamine formaldehyde based superplasticizer shows a strong dispersing effect on the binding medium to achieve:
  • High workability without segregation and bleeding.
  • High early as well as ultimate strength.
  • Better pouring consistency during casting.
Chem-O-Splast PC Chem-O-Splast PC is a polycarboxylic either based concrete super plasticizer, disperses the concrete medium at a substantial lower dosage than conventional concrete superplasticizers and improves consistency as well as strength.
Chem-O-Splast PE Chem-O-Splast PE is an admixture of a new generation based on modified polycarboxylic ether. The product has been primarily developed for applications in high performance concrete where the highest durability and performance is required. Chem-O-Splast PE is free of chloride & low alkali. It is compatible with all types of cements.
Chem-O-Splast HD Chem-O-Splast HD has been primarily developed for application in the ready mixed and precast concrete industries where the highest durability and performance is required. Superplasticizing action of Chem-O-Splast HD is different than conventional super plasticizers based on sulfonated melamine and naphthalene formaldehyde condensate, which create electrostatic repulsion of particles. It initially create the same electrostatic repulsion & further stabilizers the mixes due to static repulsions of long lateral chains linked to the polymer backbone.
Chem-O-Splast ER Chem-O-Splast ER has been primarily developed for application in ready mixed and precast concrete industries where the highest durability and performance is required. Super plasticizing action of Chem-O-Splast ER is different than conventional super plasticizers based on sulfonated melamine and naphthalene formaldehyde condensate, which create electrostatic repulsion of particles. It initially create the same electrostatic repulsion & further stabilizers the mixes due to static repulsions of long lateral chains linked to the polymer backbone.
Chem-O-Splast FR Chem-O-Splast FR is a liquid admixture based on a blend of synthetic polymers. Incorporating Chem-O-Splast FR adjusts the viscosity of a mix ensuring the right balance between flowability and resistance to segregation to be achieved. This cannot be achieved by addition of water due to possibility of segregation.
Chem-O-Splast PCP Chem-O-Splast PCP is a third generation high performance concrete hyper plasticizer, an opaque light brown colored solution of Poly Carboxylic Polymer. It disperses cement particles and fillers by electro static repulsion coupled with steric hindrance. Stabilizes the cement particle's capacity to disperse and separate, result in highly workable/flowable concrete with greatly reduced water content. It allows water reduction up to 40% while maintaining workability. Thus with Chem-O-Splast PCP we can produce concrete with high Early and ultimate strength with minimal voids and therefore optimum density.
Chem-O-Splast WR Chem-O-Splast WR is a high range water reducing and slump retaining concrete admixture, manufactured to comply to the IS 9103 and ASTM C 494 type A, Type B & Type D specifications. Chem-O-Splast WR is yellowish brown colored, ready to use liquid admixture formulated using polycarboxylate ether super plasticizers. Chem-O-Splast WR incorporates a new generation of highly powerful dispersant, which make the product possible to utilize the full potential of cement- water matrix at economical dosage.
Chem-O-Splast BCL Chem-O-Splast BCL is a brown coloured liquid admixture based on modified polycarboxylate ether. It has been specially formulated to achieve high water reduction up to 20% and to give cohesive concrete mix even at low cement content.
Chem-O-SplastRU Chem-O-SplastRU is brown colored, ready to use liquid admixture formulated from selected water-soluble polycondensates and polymers. Chem-O-SplastRU incorporates a new generation of highly powerful dispersants, which make the product possible to utilize the full potential of cement water matrix at a very low dosage
Chem-O-Splast QS Chem-O-Splast QS is a quick setting waterproofing liquid admixture for Portland cement based mortar.
Chem-O-Splast RS Chem-O-Splast RS is a high range water reducing & slump retaining concrete admixture, manufactured to comply to the IS 9103 - 1999 type E and ASTM C 494 - 86 type G specifications. Chem-O-Splast RS is browncolored, ready to use liquid admixture formulated from selected watersoluble polycondensates and polymers. Chem-O-Splast QS incorporates a new generation of highly powerful dispersants, which make the product possible to utilize the full potential of cement-water matrix at a very low dosage.
Chem-O-Splast HPC Chem-O-Splast HPC is composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation. It is preferred admixture for triple blend binder system based High Performance Concrete (HPC) mixes or mixes containing micro silica or metakaolin. It is chloride free.
Chem-O-Splast HPO Chem-O-Splast HPO is a third generation high performance concrete hyper plasticizer, an opaque – light brown coloured solution of poly carboxylic polymer. It disperses cement particles and fillers by electro static repulsion coupled with steric hindrance. Stabilizes the cement particle's capacity to disperse and separate, resulting highly workable/flowable concrete with greatly reduced water content. It allows a water reduction up to 40% while workability is maintained.

PRODUCT NAME DESCRIPTION
Chem-O-Plast SLS Chem-O-Plast SLS is a blend of Sodium Lignosulphonate and specialty additives is used for:
  • Improvement in workability
  • Lowering in consumption of cement.
  • Improvement in compressive strength.
  • Reduction in fungal growth.
Chem-O-Plast LS Chem-O-Plast LS is based on a lignosulphonate. Supplied as a brown liquid it is instantly dispersible in water. It produces more cohesive workable concrete at constant water/cement ratio with slightly improved strength or can give higher strengths at the same workability or can give cement savings upto 15% at the same water/cement ratio, workability and strength.
Chem-O-Plast SC Chem-O-Plast SC is used to improve the workability of cement mortar and prevent shrinkage cracks. Chem-O-Plast SC also improves adhesion and durability of plaster.

PRODUCT NAME DESCRIPTION
Chem-O-Cons AV Chem-O-Cons AV is entrains small air voids and distributes them homogeneously in the concrete. These air voids interrupt the capillary system and improves:
  • Improvement in workability
  • Lowering in consumption of cement.
  • Improvement in compressive strength.
  • Reduction in fungal growth.

PRODUCT NAME DESCRIPTION
Chem-O-Cons ANC Chem-O-Cons ANC is a high performance alkalifree, non- caustic and non toxic accelerator for the use in dry-mix shotcrete processes. It is a liquid additive whose dosage can be varied to the desired setting and hardening times.
Chem-O-Cons GPA Chem-O-Cons GPA is a smoke grey powder admixture for dry shotcrete mix.
  • Reduce rebound losses.
  • Increase productivity with optimum cement consumption.
  • Accelerate setting.
Chem-O-Cons ASA Chem-O-Cons ASA is a high performance alkali-free set accelerator for sprayed concrete. It is a liquid admixture whose dosage can be varied to the desired setting and hardening times.

PRODUCT NAME DESCRIPTION
Chem-O-CorB CA Chem-O-CorB CA is a liquid corrosion inhibiting, concrete admixture. It is formulated to protect embedded reinforcing steel from corrosion, which helps in extending the service life of concrete structures.
Chem-O-CorB OC Chem-O-CorB OC is a water-based organic corrosion inhibiting admixture. It is formulated for the protection of reinforcement in concrete structures. When mixed in the wet concrete as an admixture, Chem-O-CorB OC migrates towards reinforcement and forms a layer that inhibits the corrosion reaction on the anode as well as the cathode poles of the reinforcement steel. This action yields resistance and tolerance to higher levels of chlorides and therefore a reduction in corrosion rate of the reinforcement steel.

PRODUCT NAME DESCRIPTION
Chem-O-Proof IM Chem-O-Proof IM is a specialty additive based liquid integral waterproofing compound.
  • Produces impermeable matrix.
  • Reduces porosity and bleeding.
  • Improves consistency at lower dosage.
Chem-O-Proof IP Chem-O-Proof IP is a powder integral waterproofing compound for concrete and mortar, forms an internal barrier against water penetration, also increases the workability of mortar, reduces water absorption and thereby protect against freeze-thaw effect.

PRODUCT NAME DESCRIPTION
Chem-O-Proof DW Chem-O-Proof DW is an integral capillary (Crystalline) waterproofing compound which penetrates and waterproofs concrete in depth.

PRODUCT NAME DESCRIPTION
Chem-O-Proof AC Chem-O-Proof AC is an acrylic copolymer and is used specifically to modify the cementitious systems in a multiple way:
  • Tough water proof barrier coating.
  • Improves flexural and tensile strength.
  • Reduces chloride/salt penetration.
Chem-O-Proof DPS Chem-O-Proof DPS is specialty treatment coat for internal damp wall and ceiling which can be applied both in brushable and paste consistency. This product is antifungal, non-toxic, non-hazardous, and resistance to mild acids and alkalis.
Chem-O-Proof BE Chem-O-Proof BE is heavy duty bituminous elastomeric waterproof coating for asbestos sheets,sunken portion of toilets and underground structures.
Chem-O-Proof AE Chem-O-Proof AE is heavy duty aliphatic acrylic elastomeric waterproofing for external surfaces. It is water based, can be tinted to any shades, resistance to dirt picks, anti-fungal and anti - algae and can be applied both by brush and roller.
Chem-O-Proof EL Chem-O-Proof EL is an elastomeric liquid applied tar extended membrane based on polyurethane prepolymers. Cures by reaction with atmospheric moisture to give a continuous film that is rubber-like and elastic. Since it is elastomeric it is not adversely affected by extremes of temperature. It is resistant to cracking at low temperatures and does not suffer thermal flow at elevated temperatures. It can be applied by brush, airless spray or roller without the need to mix, stir or heat before application.
Chem-O-Proof EC Chem-O-Proof EC is a high build, polymer rich elastomeric coating.
Chem-O-Proof RC Chem-O-Proof RC is a high performance two component elastomeric cementitious waterproof coating for concrete, slabs, masonry and as surface protection for reinforced concrete.
Chem-O-Proof WC Chem-O-Proof WC is an acrylic emulsion based admixture for waterproof coating, bonding agent for repair, mass-in-fill and non-shrink polymer modifier cement grout system. KEM PROCRETE enhances the properties of cement slurry mortar and concrete such as flexural strength water penetration resistance etc.
Chem-O-Proof QC Chem-O-Proof QC is a high quality acrylic emulsion based coating. It is elastomeric in nature and has good resistance to weather and sunlight. It is single component system containing inert pigments and fillers suitable for application by brush, roller or spray. It prevents chloride ion ingress and exceeds all the requirements of a coating that resists carbonation and provides a smooth, durable and water repellent coating for concrete and masonry surfaces.
Chem-O-Proof LC Chem-O-Proof LC is a two component system consisting of a powder component and a latex component. The powder component is a blend of cementitious material and chloride free minerals. The liquid component is a dispersion based on styrene butadiene. KEM Proof CWC 2 K is a solvent free penetrative sealing system and once applied forms a barrier for water ingress. The ability of the system to penetrate in to the substrate makes the surface highly impermeable to water pressure and also acts as vapor barrier .
Chem-O-Proof EN Chem-O-Proof EN is a high quality, acrylic emulsion based coating. It is elastomeric in nature and has good resistance to weather and sunlight.
Chem-O-ProofBC Chem-O-ProofBC is an elastomeric coating based on selected acrylic co-polymers. When applied, it cures to form a durable, protective, waterproof membrane. It is applied by brush or roller. It can be applied on concrete, cement board, wood, brick, stone and tiles. It is a single-component emulsion containing inert pigments and has a brushable consistency.
Chem-O-Proof HP Chem-O-Proof HP is a high performance, two-component elastomeric cementitious waterproof coating for concrete, slabs and masonry. It also acts as surface protection for reinforced concrete. Designed for waterproofing hydraulic projects, it is a specialty treatment coat for internal and external waterproofing.
Chem-O-Proof FF Chem-O-Proof FF is water based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments and additives in water as a medium. It is used as primer over exterior and interior building walls before application of water based paints.
Chem-O-Proof MP Chem-O-Proof MP is special blend of polymers, surface active agents and reactive chemicals. KEM PROOF 90 is used as an admixture for cement concrete, mortar and plasters. It has plasticizing and water reducing action along with crystal formation to block the pores in cement based products. Due to this it acts as in integral waterproofing agent, making the cement concrete and plasters water tight.

PRODUCT NAME DESCRIPTION
Chem-O-Cons APP Chem-O-Cons APP is an elastomeric waterproofing membrane modified with APP polymers and reinforced with non-woven polyester
Chem-O-Cons WM Chem-O-Cons WM is SBS Modified Bitumen Waterproofing Membrane. Upper surface coating: PE film, fine sand, mineral granules or aluminum foils, cop/ foils or other isolating materials.

PRODUCT NAME DESCRIPTION
Chem-O-Grout IG Chem-O-Grout IG is a chloride free expanding grout admixture for injection grouting in structural and prestressed concrete elements.

PRODUCT NAME DESCRIPTION
Chem-O-Grout A1 Chem-O-Grout A1 is a pre-packed cementitious grout requiring only the addition of clean water to produce at the job site non-shrink multi-application grout. It is a special and unique blend of cements, micro-silica, graded sands, water reducing agents and special auxiliary chemical to deliver expansion in the plastic tate to compensate for shrinkage. It can be mixed in a range of consistencies in varying the amount of water used to produce a fluid to trowellable consistency grouts.
Chem-O-Grout A2 Chem-O-Grout A2 is supplied as a ready to use powder which is a blend of cements, graded sand, micro-silica and a blend of expansive agents. It requires only the addition of water to produce a high fluid – high strength non shrink grout. It is a unique product designed to give positive expansion in the plastic and early hardened states, producing a low porosity high durability material.
Chem-O-Grout FFG Chem-O-Grout FFG is supplied as a ready to use powder requiring only the addition of water to produce a free flowing grout. It is a unique product designed to give positive expansion in the plastic and hardened states, producing a low porosity high durability material. It is carefully designed very fine blend of portland cements modified with silica fume, water reducing agents and expansive agents. The product is formulated to produce controlled expansion in the plastic state with low water mixing requirement to minimize segregation delivering high early strength and long lasting durability.
Chem-O-Grout SS It is supplied as a ready to use powder only requiring addition of water at site. It is a blend of cements, graded silica sand, Microsilica and expansive agents. When mixed with recommended quantity of water, it will produce a high fluid ultra high strength non shrink grout. Chem-O-Grout SS is a unique product designed to give positive expansion in the plastic and as well as hardened states, producing a low porosity and high durability grout.

PRODUCT NAME DESCRIPTION
Chem-O-Grout ER 1 Chem-O-Grout ER 1 is solvent free three component, epoxy resin based grout. Chem-O-Grout ER 1 is suitable for gaps from 8.0 mm to 40 mm.
Chem-O-Grout ER 2 Chem-O-Grout ER 2 is a three component solvent free epoxy resin based grout. Chem-O-Grout ER 2 is for gaps from 20 mm to 50 mm.
Chem-O-Grout ER 3 Chem-O-Grout ER 3 is a 100% solid three component flowable, non-shrink epoxy grout which is easy to place. It has high strength and creep resistance and very high effective bearing area. Due these properties and extremely high water, oil, fuel and chemical resistance, it is best suited for oil field, refinery and petrochemical equipment grouting, as well as pile cap waterproofing applications.
Chem-O-Grout ER 4 Chem-O-Grout ER 4 is a 100% solids three component epoxy grout for thick pours. It is a very high strength grout with excellent and very low exotherm. Due to these properties it provides minimal shrinkage in thick pours up 200 mm. This makes it suitable for final positioning of critically aligned machinery within close tolerances.

PRODUCT NAME DESCRIPTION
Chem-O-Grout PYR Chem-O-Grout PYR is a two pack polyester resin based anchoring/grouting material in form of pourable mortar.
  • Rapid strength gain
  • Vibration and Corrosion resistant
  • Placeable under water.

PRODUCT NAME DESCRIPTION
Chem-O-Cons CF Chem-O-Cons CF is a chloride free expanding grout admixture for injection grouting in structural and prestressed concrete elements.
  • Improves cohesion in the concrete mix.
  • Avoids segregation of the grouting mortar.

PRODUCT NAME DESCRIPTION
Chem-O-ConsWR Chem-O-ConsWR forms a water resistant chemical barrier with the alkalis in concrete achieving:
  • Smooth release of formwork.
  • Excellent concrete surface texture.
  • Increases productivity in plants.
Chem-O-Cons MR It is a concentrated emulsion base mould release agent which needs to be diluted with water before applications. The product is specially designed to offer economic usage with better performance.

PRODUCT NAME DESCRIPTION
Chem-O-Cons UNIV Chem-O-Cons UNIV is a ready to use all purpose colourless water repellent. Easy penetration to masonry substrates. Acts as a damp proof course when injected.
Chem-O-Cons SS Chem-O-Cons SS is all purpose unique colourless water repellant based on silane siloxane.

PRODUCT NAME DESCRIPTION
Chem-O-Cons CTC Chem-O-Cons CTC is a concentrated mildly acidic ceramic tile cleaner / stain remover. It removes mineral deposits, cement residues, soap film, efflorescence, algae and most types of soil. Excellent cleaner for floor and walls.

PRODUCT NAME DESCRIPTION
Chem-O-Bond CM Chem-O-Bond CM has an excellent bonding cementitious mixes.
Chem-O-Bond SR Chem-O-Bond SR is styrene butadiene rubber based dispersion for improving adhesion and strength of all types of commonly used mortars for restoration jobs.
Chem-O-Bond ER 20 Chem-O-Bond ER 20 is a specially formulated non - shrink, solvent free epoxy resin based system blended with fine inert fillers. It is supplied as a two component material in pre weighed quantities ready for on site mixing and use.
Chem-O-Bond ER 24 Chem-O-Bond ER 24 is a specially formulated epoxy resin based system blended with fine Inert fillers. It is supplied as a two component material in pre-weighed quantities ready for on-site mixing and use.
Chem-O-Bond ER 28 Chem-O-Bond ER 28 is a thixotropic two component epoxy based adhesive bond to variety of surfaces. It is supplied in gel like consistency which is easy to mix and apply. Base and hardner components and coloured different for ease of mixing.

PRODUCT NAME DESCRIPTION
Chem-O-Cons SEAL Chem-O-Cons SEAL is a single component cementitious base crack sealing compound.
Chem-O-Cons CTP Chem-O-Cons CTP is an acrylic co-polymer based white thixotropic paste specially formulated for sealing static cracks.

PRODUCT NAME DESCRIPTION
Chem-O-Cons MC Chem-O-Cons MC is a general purpose nonshrink, cementitious, flowable high strength grout for repairs with high strength precision concrete. Free flowing on site, suited for thickness up to 40 mm to 100 mm. Suitable for various structural strengthening measures such as encasement build-ups, jacketing etc.

PRODUCT NAME DESCRIPTION
Chem-O-Cons MR 11 Chem-O-Cons MR 11 is a single component cement based enriched with fine additives, fibre reinforced restoration mortar. Used for structural repair new and old concrete. Applied manually or mechanically.
Chem-O-Cons MR 19 Chem-O-Cons MR 19 is thixotropic solvent free, two component epoxy based repair mortar. The base component is white coloured and the hardener is grey to facilitate ease of mixing.
Chem-O-Cons MR 20 Chem-O-Cons MR 20 is solvent free three component epoxy based repair mortar it can be applied at a thickness between 5mm to 50mm in horizontal & 5mm to 10mm in vertical.
Chem-O-Cons MR 24 Chem-O-Cons MR 24 is a three component solvent free epoxy based mortar, designed for fast and durable repairs to concrete, particularly in vertical or overhead situations. It can be applied at a thickness between 5mm to 30mm in vertical, and 5mm to 25mm in overhead in one layer.
Chem-O-Cons MR 28 Chem-O-Cons MR 28 is supplied as a ready to use dry powder requiring only the addition of water to produce cohesive easily applied mortar. The product is a careful blend of portland cements, graded silica sands, shrinkage compensating agents, silica fume, water reducing agents and compatible water resistant polymers. The product is designed to give good adhesion and cohesion in the plastic state and low water requirement resulting in a non-shrink low porosity mortar with good compressive strength and durability.
Chem-O-Cons MR 37 Chem-O-Cons MR 37 a rapid setting mortar made from special cements, fine aggregates, additives and fibers. It requires addition of potable water for mixing. It produces high early strength and achieves initial set in 10 to 30 minutes. Final set is achieved in 30 - 90 minutes. Repaired areas may be opened to traffic within 2 - 4 hours, after application.
Chem-O-Cons MR 46 Chem-O-Cons MR 46 jointing compound is a bricklaying mortar made from a special combination of cement, graded sand and additives. It is generally applied at a thickness of 3mm, being a pre- mixed mortar it is easy to use & always consistent in performance.

PRODUCT NAME DESCRIPTION
Chem-O-Ject WMT Chem-O-Ject WMT is a two part, solvent-free, water moisture tolerant epoxy resin based injection system designed to form a strong permanent bond and seal in cracks in dry, damp or wet concrete and masonry. It is designed to be injected into cracks using suitable resin injection equipment. However it can be easily applied manually in horizontal application due to using flooding technique its low viscosity.
Chem-O-Ject PU 2P Chem-O-Ject PU 2P is a two part solvent-free, low viscosity high tensile strength polyurethane based system designed to form a strong permanent bond and seal in cracks in dry, damp or wet concrete and masonry.
Chem-O-Ject PU 3P Chem-O-Ject PU 3P is a three part solvent-free, injection foam for stopping water leakages through cracks.
Chem-O-Ject PU A1 Chem-O-Ject PU A1 is single component fast reacting PU Injection foam. The product is injected in leaking cracks to stop the flow of water. It reacts with available water foaming almost instantly. This help in stopping even a heavy leakage in concrete structures such as water retaining structures, basements, tunnels etc.
Chem-O-Ject ERP Chem-O-Ject ERP is solvent free epoxy resins with polyamine hardeners. The grades additionally contain inert granular powdered fillers. It is used for gaps from 0.3 mm to 10 mm.

PRODUCT NAME DESCRIPTION
Chem-O-Tile SS Chem-O-Tile SS is a specialty additive based cementitious product for fixing tiles to surfaces for its non-sagging and non-shrink advantages over conventional neat cement pastes.
Chem-O-Tile JF Chem-O-Tile JF is cement based tile joint filler available in different colours. Its versatile property also helps to stop seepages through tile joints.
Chem-O-Tile WF Chem-O-Tile WF is a high performance white cement based polymer modified tile fixing adhesive for internal walls and floor. Suitable for external floorings, tile-ontile applications, marbles, glass tile and natural stone.
Chem-O-Tile MF Chem-O-Tile MF is a polymer modified, flexible cementitious based high performance waterproof adhesive for fixing natural stones, heavy duty tiles, ceramics, mosaic, granite for floor and wall and walls.

PRODUCT NAME DESCRIPTION
Chem-O-Tile ER Chem-O-Tile ER is a solvent-free epoxy resin blended with selected fine fillers. It is supplied as a three component system in pre-weighed quantities ready for on-site mixing and use.

PRODUCT NAME DESCRIPTION
Chem-O-Floor NM Chem-O-Floor NM is ready to use non-metallic floor hardener designed with high quality natural aggregates which gives abrasion and wear resistance. It bonds monolithically to the base concrete, suitable for existing and as well as new floors.
Chem-O-Floor PM Chem-O-Floor PM is a pre-mixed ready to use dry powder consisting of selected and graded high quality Emery aggregates, portland cement and special additives to impart the desired properties. The emery aggregate used is an extremely hard, chemically inert aggregate which resists polishing, therefore, providing a non-slip skid resistant surface even when wet. Also being non-metallic it will not rust.

Our Leading Brands

For more information get in touch with us